Mugen Application: Guide Flash MediaTek Devices Stock Rom Using SP Flash Tool

Wednesday, May 17, 2017

Guide Flash MediaTek Devices Stock Rom Using SP Flash Tool

Flash MediaTek Devices Stock Rom Using SP Flash Tool

Tools needed:-

-MTK USB VCOM Driver.

-ADB Driver.

-Stock Rom for your MediaTek Device.

-Smart Phone Flash Tool.

Step 1:- First Download Smart Phone Flash Tool From the given Link below.

Smart Phone Flash Tool Download

Note:- MTK USB VCOM or ADB Driver must be installed before, For this check this [GUIDE].

Step 2:- Extract downloaded package and Run Flash_Tool.exe as administrator.

Step 3:- Now click on scatter-loading and browse for your devices scatter file from stock rom.

Step 4:- As the scatter file is loaded you will see the checked file detail in pan, see image.

Step 5:- Now If you want only upgrade your Rom then click on Firmware->Upgrade and if you want clean install Rom then click on Download. (make sure phone is not connected this time.)

Step 6:- Now Enable USB debugging in your phone by opening Settings»Developer Options»USB debugging and check it and power-off your device.
(If Developer Options is not shows then goto Settings»About Phone and click on Build number 5 or 6 time until you see message "You are now a Developer")

Step 7:- Now in off mode Remove phones battery(if you have non-Removable battery leave as it) and connect to USB Cable and insert battery.

Now it will detect your device and start flashing. Sit beside and wait for success message as see in image.

Thats it.
Enjoy your Stock Rom...

If any problem then comment below.

Available link for download